Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Versalloy™ HC 9210-70N - TPV - Avient Corporation

Material Data Center offers the following functions for Versalloy™ HC 9210-70N:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Versalloy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Mechanical propertiesValueUnitTest Standard
ASTM Data
Modulus at 100% Elongation 2.45 MPa ASTM D 412
Modulus at 300% Elongation 1.17 MPa ASTM D 412
Shore A Hardness 70 - ASTM D 2240
Tear Strength 31.5 kN/m ASTM D 624
Compression Set , 22 hr @ 73 °F 23 % ASTM D 395
Compression Set , 22 hr @ 158 °F 42 % ASTM D 395
Tensile Strength at Break 5.38 MPa ASTM D 412
Elongation at Break 590 % ASTM D 412
Other propertiesValueUnitTest Standard
Density 890 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Mold temperature 15.6 - 26.7 °C -
Zone 1 149 - 188 °C -
Zone 2 160 - 199 °C -
Zone 3 171 - 210 °C -
Nozzle temperature 171 - 210 °C -
Screw speed 50 - 100 rpm -
Injection speed 25.4 - 127 mm/s -
Back pressure 0 - 0.689 MPa -
Holding pressure 1.45 - 3.38 MPa -
Characteristics
Processing
Injection Molding
Delivery form
Pellets, Natural Color
Special Characteristics
Halogen-free
Features
Good Adhesion, Soft Feel
Certifications
US Pharmacopeia Class VI Approved
Applications
Medical
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.