Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Versollan™ RU 2204X - TPU - Avient Corporation

Material Data Center offers the following functions for Versollan™ RU 2204X:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Versollan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 76 g/10min ASTM D 1238
Temperature 200 °C -
Load 5 kg -
Mold Shrinkage, MD 0.014 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ASTM Data
Modulus at 100% Elongation 1.86 MPa ASTM D 412
Modulus at 300% Elongation 1.01 MPa ASTM D 412
Shore A Hardness 55 - ASTM D 2240
Tear Strength 42 kN/m ASTM D 624
Compression Set , 22 hr @ 73 °F 26 % ASTM D 395
Tensile Strength at Break 12.4 MPa ASTM D 412
Elongation at Break 690 % ASTM D 412
Other propertiesValueUnitTest Standard
Density 1140 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 48.9 - 54.4 °C -
Pre-drying - Time 3 - 4 h -
Melt temperature 188 - 210 °C -
Mold temperature 21.1 - 32.2 °C -
Zone 1 163 - 188 °C -
Zone 2 182 - 193 °C -
Zone 3 188 - 210 °C -
Nozzle temperature 193 - 216 °C -
Screw speed 75 - 125 rpm -
Injection speed 12.7 - 50.8 mm/s -
Back pressure 0 - 0.552 MPa -
Holding pressure 0.621 - 1.45 MPa -
Characteristics
Processing
Injection Molding, Other Extrusion
Delivery form
Natural Color
Features
Soft Feel
Chemical Resistance
General Chemical Resistance, Oil Resistance
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.