This is the free Material Data Center Datasheet of VESTAMID® L-GB30 - PA12-GB30 - Evonik Operations GmbH

Microglass bead-filled (30%) PA12 resin for the injection moulding of rigid, low-warpage and dimensionally accurate mouldings

VESTAMID® L-GB30 NC is a glass bead –reinforced heat stabilized Polyamide 12 for injection molding. The material contains about 30% microglass beads, an ageing protective agent and a processing aid for a fast and even form filling. Due to the reinforcement moldings from this compound exhibit a higher strength, an isotropic shrinkage and good heat resistance, excellent for gear housings for mechanical counting mechanisms (e.g.speedometers or water gauges).

Further advantages of VESTAMID® L-GB30 NC are the characterizing properties of PA12, e.g., low water absorption, good dimensional stability and nearly constant mechanical properties at changing ambient humidity.
  
VESTAMID® L-GB30 NC is supplied as cylindrical granules, ready for processing, in moisture-proof bags.
 
Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.
 
The results shown have been generated from a low number of production lots. Therefore, they are preliminary and not yet the result of a statistical evaluation. Therefore they must not be used to establish specifications.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM