Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® LX9043 NC - PA12 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® LX9043 NC:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Heat-stabilized polyamide 12 molding compound with improved demoldability

VESTAMID® LX9043 NCis a semi-crystalline, low-viscosity molding compound based on PA12, from which various hollow articles can be produced by rotational molding. The polyamide 12 molding compound is especially suitable for industrial and technical applications with requirements for the manufacture of plastic products of different sizes. The semi-crystalline molding compound absorbs only small amounts of water. Components made from it therefore exhibit excellent dimensional stability under varying ambient humidity.

VESTAMID® LX9043 NC is supplied as cylindrical granules, ready for processing, in moisture-proof bags.
In the undamaged original packaging, the product has a shelf life of at least 2 years if stored in dry rooms at temperatures not exceeding 30°C.


Pigmentation may affect values.

The results shown have been generated from a low number of production lots. Therefore, they are preliminary and not yet the result of a statistical evaluation. Therefore they must not be used to establish specifications.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 63 cm³/10min ISO 1133
Temperature 230 °C -
Load 5 kg -
Molding shrinkage, parallel 0.9 % ISO 294-4, 2577
Molding shrinkage, normal 1.2 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 1107 MPa ISO 527
Yield stress 39 MPa ISO 527
Yield strain 13 % ISO 527
Nominal strain at break >50 % ISO 527
Charpy impact strength, +23°C N kJ/m² ISO 179/1eU
Charpy impact strength, -30°C N kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 5 kJ/m² ISO 179/1eA
Type of failure C - -
Charpy notched impact strength, -30°C 4 kJ/m² ISO 179/1eA
Type of failure C - -
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 178 °C ISO 11357-1/-3
Glass transition temperature, 10°C/min 40 °C ISO 11357-1/-2
Temp. of deflection under load, 1.80 MPa 46 °C ISO 75-1/-2
Temp. of deflection under load, 8.00 MPa 96 °C ISO 75-1/-2
Vicat softening temperature, B 133 °C ISO 306
Other propertiesValueUnitTest Standard
Water absorption 1.5 % Sim. to ISO 62
Density 1010 kg/m³ ISO 1183
Characteristics
Processing
Thermoforming, Rotational Molding
Delivery form
Pellets, Natural Color
Additives
Release agent
Special Characteristics
Heat stabilized or stable to heat
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.