Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTODUR® 3013 - PBT - Evonik Operations GmbH

Check here, which other Vestodur datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties

Any use of this information falls under the rules of our disclaimer.

Product Texts

High viscosity polybutylene terephthalate with improved hydrolysis resistance

VESTODUR® 3013 is a high viscosity polybutylene terephthalate (PBT) resin for the extrusion, with an improved resistance to hydrolysis.

 

The resin is especially suitable for the manufacture of stiff, small-diameter tubing, e. g. for loose fiber optic buffer tubes.

 

VESTODUR® 3013 is supplied as cylindrical pellets in polyethylene packaging, ready for processing.

 

Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT WWW.VESTODUR.COM

Processing/Physical Characteristics	dry / cond	Unit	Test Standard
ISO Data
Melt volume-flow rate, MVR	9 / *	cm³/10min	ISO 1133
Temperature	250 / *	°C	-
Load	2.16 / *	kg	-
Molding shrinkage, parallel	1.7 / *	%	ISO 294-4, 2577
Molding shrinkage, normal	1.7 / *	%	ISO 294-4, 2577

Mechanical properties	dry / cond	Unit	Test Standard
ISO Data
Tensile Modulus	2500 / 2450	MPa	ISO 527
Yield stress	57 / 57	MPa	ISO 527
Yield strain	11 / 12	%	ISO 527
Nominal strain at break	>50 / >50	%	ISO 527
Tensile creep modulus, 1h	* / 2600	MPa	ISO 899-1
Tensile creep modulus, 1000h	* / 1500	MPa	ISO 899-1
Charpy impact strength, +23°C	N / N	kJ/m²	ISO 179/1eU
Charpy impact strength, -30°C	250 / 250	kJ/m²	ISO 179/1eU
Type of failure	C(P)[C(P)] / C	-	-
Charpy notched impact strength, +23°C	5 / 5	kJ/m²	ISO 179/1eA
Type of failure	C / C	-	-
Charpy notched impact strength, -30°C	4 / 4	kJ/m²	ISO 179/1eA
Type of failure	C / C	-	-
Tensile notched impact strength, +23°C	110 / -	kJ/m²	ISO 8256/1
Shore D hardness	77 / *	-	ISO 7619-1

C(P):

CAMPUS

Thermal properties	dry / cond	Unit	Test Standard
ISO Data
Melting temperature, 10°C/min	223 / *	°C	ISO 11357-1/-3
Glass transition temperature, 10°C/min	45 / *	°C	ISO 11357-1/-2
Temp. of deflection under load, 1.80 MPa	55 / *	°C	ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa	150 / *	°C	ISO 75-1/-2
Vicat softening temperature, B	180 / *	°C	ISO 306
Coeff. of linear therm. expansion, parallel	110 / *	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion, normal	110 / *	E-6/K	ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
Thickness tested	1.6 / *	mm	-
Burning Behav. at thickness h	HB / *	class	IEC 60695-11-10
Thickness tested	0.8 / *	mm	-
Oxygen index	23 / *	%	ISO 4589-1/-2

Electrical properties	dry / cond	Unit	Test Standard
ISO Data
Relative permittivity, 100Hz	3.3 / -	-	IEC 62631-2-1
Relative permittivity, 1MHz	3.5 / -	-	IEC 62631-2-1
Dissipation factor, 100Hz	20 / -	E-4	IEC 62631-2-1
Dissipation factor, 1MHz	230 / -	E-4	IEC 62631-2-1
Volume resistivity	1E11 / -	Ohm*m	IEC 62631-3-1
Surface resistivity	* / 1E14	Ohm	IEC 62631-3-2
Comparative tracking index	600 / -	-	IEC 60112

Other properties	dry / cond	Unit	Test Standard
Water absorption	0.5 / *	%	Sim. to ISO 62
Humidity absorption	0.1 / *	%	Sim. to ISO 62
Density	1310 / -	kg/m³	ISO 1183

Characteristics

Processing

Film Extrusion, Pipe/Tube Extrusion, Profile Extrusion, Sheet Extrusion, Other Extrusion

Delivery form

Pellets

Chemical Resistance

Hydrolytically Stable

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Chemical Media Resistance

Acids
	Acetic Acid (5% by mass) (23°C)
	Citric Acid solution (10% by mass) (23°C)
	Hydrochloric Acid (36% by mass) (23°C)
	Nitric Acid (40% by mass) (23°C)
	Sulfuric Acid (38% by mass) (23°C)
	Sulfuric Acid (5% by mass) (23°C)
Bases
	Sodium Hydroxide solution (35% by mass) (23°C)
	Ammonium Hydroxide solution (10% by mass) (23°C)
Alcohols
	Isopropyl alcohol (23°C)
	Methanol (23°C)
	Ethanol (23°C)
Hydrocarbons
	iso-Octane (23°C)
Ketones
	Acetone (23°C)
Ethers
	Diethyl ether (23°C)
Mineral oils
	SAE 10W40 multigrade motor oil (23°C)
	Insulating Oil (23°C)
Standard Fuels
	Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C)
	Diesel fuel (pref. ISO 1817 Liquid F) (23°C)
	Diesel fuel (pref. ISO 1817 Liquid F) (90°C)
Salt solutions
	Sodium Chloride solution (10% by mass) (23°C)
	Sodium Hypochlorite solution (10% by mass) (23°C)
	Sodium Carbonate solution (20% by mass) (23°C)
Other
	Ethyl Acetate (23°C)
	Hydrogen peroxide (23°C)
	Ethylene Glycol (50% by mass) in water (108°C)
	Water (23°C)
	Deionized water (90°C)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.