Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vistamaxx™ 6202 - TPO - ExxonMobil Chemical

Material Data Center offers the following functions for Vistamaxx™ 6202:
unit conversion, PDF datasheet print

Check here, which other Vistamaxx datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 9.1 g/10min ASTM D 1238
Temperature 190 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
Other Standards[S]
Tensile Strength at Break 5.52 MPa ExxonMobil Method
Elongation at Break 800 % ExxonMobil Method
Modulus at 100% Elongation 2.21 MPa ExxonMobil Method
Modulus at 300% Elongation 0.848 MPa ExxonMobil Method
Shore A Hardness 64 - ExxonMobil Method
Tear Strength 32 kN/m ExxonMobil Method
S: These properties are reported by the producer according standards that are different to our defaults.
Thermal propertiesValueUnitTest Standard
Other Standards[S]
Vicat Temperature 45 °C ExxonMobil Method
S: These properties are reported by the producer according standards that are different to our defaults.
Other propertiesValueUnitTest Standard
Other Standards[S]
Density 862 kg/m³ ExxonMobil Method
S: These properties are reported by the producer according standards that are different to our defaults.
Characteristics
Processing
Injection Molding, Film Extrusion, Profile Extrusion, Sheet Extrusion, Calandering
Delivery form
Pellets
Special Characteristics
High impact or impact modified
Features
Blending Resin, Good Adhesion, Heat Sealable
Chemical Resistance
General Chemical Resistance
Certifications
RoHS compliant
Applications
Packaging
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.