Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® 22HSPCN NT0856 - PA66 - Ascend

Material Data Center offers the following functions for Vydyne® 22HSPCN NT0856:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Vydyne 22HSPCN NT0856 is a general-purpose, unfilled, lubricated, heat stabilized PA66 resin. Designed principally for injection-molding fabrication, this product offers a combination of engineering properties characterized by high strength; rigidity; good toughness; high melt point; good surface lubricity; abrasion resistance; and resistance to many chemicals, machine and motor oils, solvents and gasoline. this product is designed to resist thermal degradation when exposed to warm climates.
Processing/Physical Characteristicsdry / condUnitTest Standard
ISO Data
Molding shrinkage, parallel 1.6 / * % ISO 294-4, 2577
Molding shrinkage, normal 1.7 / * % ISO 294-4, 2577
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus 3300 / 1200 MPa ISO 527
Yield stress 87 / 52 MPa ISO 527
Yield strain 4.9 / 22 % ISO 527
Charpy impact strength, +23°C N / N kJ/m² ISO 179/1eU
Charpy impact strength, -30°C N / N kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 4.6 / 18 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 4.9 / 4.7 kJ/m² ISO 179/1eA
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 260 / * °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 67 / * °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 199 / * °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 112 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 103 / * E-6/K ISO 11359-1/-2
Electrical propertiesdry / condUnitTest Standard
ISO Data
Volume resistivity >1E13 / 4.19E10 Ohm*m IEC 62631-3-1
Electric strength 30 / 23 kV/mm IEC 60243-1
Other propertiesdry / condUnitTest Standard
Water absorption 1.7 / * % Sim. to ISO 62
Humidity absorption 2.9 / * % Sim. to ISO 62
Density 1130 / - kg/m³ ISO 1183
Characteristics
Processing
Injection Molding
Delivery form
Pellets, Natural Color
Additives
Lubricants, Release agent
Special Characteristics
Heat stabilized or stable to heat
Chemical Resistance
Solvent Resistance, Oil Resistance
Applications
General Purpose
Regional Availability
Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.