Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® R862H BK0676 - PA66-(GF+MX) - Ascend

Material Data Center offers the following functions for Vydyne® R862H BK0676:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
Vydyne R862H BK0676 is a general purpose, glass-fiber, mineral-reinforced, heat stabilized PA66 resin. Available in black, this product is also lubricated for improved flow and offers superior surface appearance. R862H BK0676 can be successfully used in a wide range of injection-molding engineering applications. Typical parts include lower cowl top covers, radiator shrouds, fans and mirror brackets, cylinder head covers.
Processing/Physical Characteristicsdry / condUnitTest Standard
ISO Data
Molding shrinkage, parallel 0.4 / * % ISO 294-4, 2577
Molding shrinkage, normal 1.1 / * % ISO 294-4, 2577
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus 10500 / 7800 MPa ISO 527
Stress at break 149 / 98 MPa ISO 527
Strain at break 2.2 / 2.2 % ISO 527
Flexural modulus, 23°C 10800 / 5600 MPa ISO 178
Flexural strength 220 / 120 MPa ISO 178
Charpy impact strength, +23°C 49 / 48 kJ/m² ISO 179/1eU
Charpy impact strength, -30°C 46 / 50 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 6 / 10 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 6 / 6 kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C 7 / 11 kJ/m² ISO 180/1A
Izod notched impact strength 6 / 7 kJ/m² ISO 180/1A
Temperature -30 °C -
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 260 / * °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 234 / * °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 255 / * °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 18.5 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 66.9 / * E-6/K ISO 11359-1/-2
Other propertiesdry / condUnitTest Standard
Water absorption 1.5 / * % Sim. to ISO 62
Humidity absorption 1.5 / * % Sim. to ISO 62
Density 1470 / - kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 °C -
Pre-drying - Time 4 h -
Melt temperature 285 - 305 °C -
Mold temperature 65 - 95 °C -
Zone 1 280 - 310 °C -
Zone 2 280 - 310 °C -
Zone 3 280 - 310 °C -
Nozzle temperature 280 - 310 °C -
Characteristics
Processing
Injection Molding
Delivery form
Pellets, Black
Additives
Lubricants
Special Characteristics
Heat stabilized or stable to heat
Features
Creep Resistance
Chemical Resistance
General Chemical Resistance, Solvent Resistance
Applications
Automotive, General Purpose
Regional Availability
North America, Europe, Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.