Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of WELLAMID 6000/52 GV 15 HWCP - PA6-GF15 - CP-Polymer-Technik GmbH & Co.KG

Material Data Center offers the following functions for WELLAMID 6000/52 GV 15 HWCP:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Wellamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristicsdry / condUnitTest Standard
ISO Data
Molding shrinkage, parallel 0.3 / * % ISO 294-4, 2577
Molding shrinkage, normal 0.8 / * % ISO 294-4, 2577
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus 5800 / 3500 MPa ISO 527
Tensile Strength 105 / 65 MPa ISO 527
Strain at break 4 / 10 % ISO 527
Flexural modulus, 23°C 5200 / - MPa ISO 178
Charpy impact strength, +23°C 50 / 90 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 13 / 27 kJ/m² ISO 179/1eA
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 223 / * °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 170 / * °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 200 / * °C ISO 75-1/-2
Vicat softening temperature, B 200 / * °C ISO 306
Coeff. of linear therm. expansion, parallel 30 / * E-6/K ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn. HB / * class IEC 60695-11-10
Thickness tested 1.5 / * mm -
Burning behav. at thickness h HB / * class IEC 60695-11-10
Thickness tested 3.0 / * mm -
Electrical propertiesdry / condUnitTest Standard
ISO Data
Relative permittivity, 1MHz 4 / 7 - IEC 62631-2-1
Dissipation factor, 1MHz 250 / 2000 E-4 IEC 62631-2-1
Volume resistivity 1E13 / 1E10 Ohm*m IEC 62631-3-1
Surface resistivity * / 1E10 Ohm IEC 62631-3-2
Electric strength 40 / 35 kV/mm IEC 60243-1
Comparative tracking index 550 / - - IEC 60112
Other propertiesdry / condUnitTest Standard
Humidity absorption 2.2 / * % Sim. to ISO 62
Density 1210 / - kg/m³ ISO 1183
Characteristics
Special Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.