Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of BMC A50 XHS - UP-GF23 - LyondellBasell Industries

Material Data Center offers the following functions for BMC A50 XHS:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other BMC datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.0025 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Strength at Yield 65.5 MPa ASTM D 638
Compressive Strength 131 MPa ASTM D 695
Flexural Modulus 1241 MPa ASTM D 790
Flexural Strength 131 MPa ASTM D 790
Rockwell Hardness M75 - ASTM D 785
Izod Impact notched, 1/8 in 747 J/m ASTM D 256
Izod Impact notched, 1/4 in 107 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ASTM Data
UL 94 Flame rating V-0 - UL 94
Thickness tested 1.57 mm -
DTUL @ 66 psi 134 °C ASTM D 648
DTUL @ 264 psi 126 °C ASTM D 648
Melting Temperature 218 °C ASTM D 3418
Glass Transition Temperature 145 °C ASTM E 1356
Vicat Temperature 151 °C ASTM D 1525
Specific Heat 1370 J/(kg K) ASTM C 351
Other propertiesValueUnitTest Standard
Water Absorption, 24hr 0.15 % ASTM D 570
Density 1890 kg/m³ ASTM D 792
Characteristics
Processing
Injection Molding
Delivery form
Bulk Molding Compound
Special Characteristics
Flame retardant
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.