Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Dryflex® SE 50A001 - TPE - Hexpol TPE

Material Data Center offers the following functions for Dryflex® SE 50A001:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Dryflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 8.5 MPa ISO 37
Strain at break 850 % ISO 37
Compression set at 70 °C, 24h 36 % ISO 815
Compression set at 100 °C, 24h 59 % ISO 815
Tear strength 19.6 kN/m ISO 34-1
Other propertiesValueUnitTest Standard
Density 890 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 °C -
Pre-drying - Time 2 - 3 h -
Mold temperature 15 - 50 °C -
Feed temperature 170 - 190 °C -
Zone 1 180 - 200 °C -
Zone 2 190 - 210 °C -
Zone 3 200 - 220 °C -
Characteristics
Processing
Injection Molding
Special Characteristics
Translucent
Features
Good Adhesion, Scratch Resistant, Soft Feel
Certifications
Food contact
Applications
Automotive, Packaging, Sports Equipment
Regional Availability
North America, Europe, Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.