Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DuraStar™ MN610 - PCTA - Eastman Chemical Co.

Material Data Center offers the following functions for DuraStar™ MN610:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Durastar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts

DuraStar™ Polymer MN610 Natural polymer has excellent appearance and is nearly water-clear. Benefits include toughness, chemical resistance, and excellent processing characteristics. MN610 has very good toughness as shown by Izod impact resistance. Easy to process, it flows readily and fills intricate molds. This product does not contain a mold release.




Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.004 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 1800 MPa ISO 527
Yield stress 47 MPa ISO 527
Yield strain 4 % ISO 527
Stress at break 46 MPa ISO 527
Strain at break 200 % ISO 527
Flexural modulus, 23°C 1850 MPa ISO 178
Flexural strength 65 MPa ISO 178
Izod notched impact strength, +23°C 7.8 kJ/m² ISO 180/1A
Izod notched impact strength 4.8 kJ/m² ISO 180/1A
Temperature -40 °C -
ASTM Data
Tensile Strength at Yield 47 MPa ASTM D 638
Tensile Strength at Break 54 MPa ASTM D 638
Elongation at Yield 5 % ASTM D 638
Elongation at Break 300 % ASTM D 638
Flexural Modulus 2000 MPa ASTM D 790
Rockwell Hardness 103 - ASTM D 785
Izod Impact notched, 1/8 in 80.1 J/m ASTM D 256
Izod Impact notched, Low-Temperature 40 J/m ASTM D 256
Temperature -40 °C -
Izod Impact unnotched, 1/8 in N J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ASTM Data
DTUL @ 66 psi 74 °C ASTM D 648
DTUL @ 264 psi 65 °C ASTM D 648
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 0.3 % ASTM D 1003
Light Transmittance 91 % ASTM D 1003
Other propertiesValueUnitTest Standard
Density 1200 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 70 °C -
Pre-drying - Time 3 h -
Melt temperature 230 - 280 °C -
Mold temperature 15 - 30 °C -
Characteristics
Processing
Injection Molding
Delivery form
Natural Color
Special Characteristics
Transparent
Chemical Resistance
General Chemical Resistance
Applications
Medical
Regional Availability
North America, Europe, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.