Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Eastar™ DN011 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Eastar™ DN011:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Eastar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts

Eastar™ DN011 copolyester is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar DN011 contains a mold release.




Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.0035 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Modulus 1800 MPa ASTM D 638
Tensile Strength at Yield 44 MPa ASTM D 638
Tensile Strength at Break 54 MPa ASTM D 638
Elongation at Yield 4 % ASTM D 638
Elongation at Break 330 % ASTM D 638
Flexural Modulus 1800 MPa ASTM D 790
Flexural Strength 66 MPa ASTM D 790
Rockwell Hardness 105 - ASTM D 785
Izod Impact notched, 1/8 in N J/m ASTM D 256
Izod Impact notched, Low-Temperature 77 J/m ASTM D 256
Temperature -40 °C -
Izod Impact unnotched, 1/8 in N J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ASTM Data
DTUL @ 66 psi 73 °C ASTM D 648
DTUL @ 264 psi 64 °C ASTM D 648
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 1 % ASTM D 1003
Light Transmittance 92 % ASTM D 1003
Other propertiesValueUnitTest Standard
Density 1230 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 71 °C -
Pre-drying - Time 6 h -
Melt temperature 249 - 271 °C -
Mold temperature 16 - 38 °C -
Characteristics
Processing
Injection Molding
Additives
Release agent
Special Characteristics
High impact or impact modified, Transparent
Features
Copolymer
Chemical Resistance
General Chemical Resistance
Certifications
Food contact
Applications
Building Construction, Packaging
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.