Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Excelloy TK15 (BK104) - (ABS+PBT) - Techno-UMG Co., Ltd.

Material Data Center offers the following functions for Excelloy TK15 (BK104):
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Excelloy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 7 g/10min ISO 1133
Temperature 240 °C -
Load 10 kg -
Molding shrinkage, parallel 0.6 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 38 MPa ISO 527
Flexural modulus, 23°C 1530 MPa ISO 178
Flexural strength 55 MPa ISO 178
Charpy impact strength, +23°C 55 kJ/m² ISO 179/1eU
Rockwell hardness R 98 - ISO 2039-2
ASTM Data
Tensile Strength 39.2 MPa ASTM D 638
Flexural Modulus 1860 MPa ASTM D 790
Flexural Strength 63.7 MPa ASTM D 790
Rockwell Hardness R 99 - ASTM D 785
Other propertiesValueUnitTest Standard
Density 1100 kg/m³ ISO 1183
Density 1100 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 - 90 °C -
Pre-drying - Time 2 - 5 h -
Mold temperature 40 - 80 °C -
Zone 1 220 - 270 °C -
Characteristics
Processing
Injection Molding
Special Characteristics
High impact or impact modified
Chemical Resistance
General Chemical Resistance
Applications
Electrical and Electronical
Regional Availability
North America, Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.