Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Fibrolon® P 7550 - PP-NF... - FKuR Kunststoff GmbH

Material Data Center offers the following functions for Fibrolon® P 7550:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Fibrolon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
Natural fiber reinforced compound for injection moulding.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 11.5 g/10min ISO 1133
Temperature 230 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 3250 MPa ISO 527
Tensile Strength 22 MPa ISO 527
Yield strain 3 % ISO 527
Stress at break 22 MPa ISO 527
Strain at break 3 % ISO 527
Flexural modulus, 23°C 3550 MPa ISO 178
Charpy impact strength, +23°C 7.9 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 3.3 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 165 °C ISO 11357-1/-3
Vicat softening temperature, A 139 °C ISO 306
Other propertiesValueUnitTest Standard
Density 1030 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 °C -
Pre-drying - Time 2 - 4 h -
Mold temperature 30 - 50 °C -
Zone 1 150 °C -
Zone 2 170 °C -
Zone 3 190 °C -
Nozzle temperature 200 °C -
Injection pressure 200 MPa -
Characteristics
Processing
Injection Molding
Delivery form
Pellets, Brown
Certifications
Contains renewable resources
Applications
Toys
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Application examples
Knife handle
Little dish
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.