Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FIL-A-GEHR PA12® - PA12 - Gehr GmbH

Material Data Center offers the following functions for FIL-A-GEHR PA12®:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Fil-A-Gehr datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 8[1] cm³/10min ISO 1133
Temperature 235 °C -
Load 5 kg -
1: Data based on raw material
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 1440[2] MPa ISO 527
Yield stress 43[2] MPa ISO 527
Charpy notched impact strength, +23°C 11[2] kJ/m² ISO 179/1eA
2: Data based on raw material
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 180[3] °C ISO 11357-1/-3
3: Data based on raw material
Other propertiesValueUnitTest Standard
Density 1010[4] kg/m³ ISO 1183
4: Data based on raw material
Characteristics
Processing
Additive Manufacturing
Delivery form
Monofilament, Natural Color
Special Characteristics
High impact or impact modified
Features
Good Adhesion, Low Odor
Chemical Resistance
General Chemical Resistance
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.