Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hostalen CRP 100 RCD BLACK - (PE-HD) - LyondellBasell Industries

Material Data Center offers the following functions for Hostalen CRP 100 RCD BLACK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Hostalen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 0.23 g/10min ISO 1133
Temperature 190 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 1100 MPa ISO 527
Yield stress 23 MPa ISO 527
Yield strain 9 % ISO 527
Strain at break 650 % ISO 527
Tensile creep modulus, 1h 850 MPa ISO 899-1
Charpy notched impact strength, +23°C 26 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 13 kJ/m² ISO 179/1eA
Shore D hardness 63 - ISO 7619-1
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 129 °C ISO 11357-1/-3
Vicat softening temperature, B 74 °C ISO 306
Other propertiesValueUnitTest Standard
Density 958 kg/m³ ISO 1183
Bulk density 580 kg/m³ -
Processing Recommendation Injection MoldingValueUnitTest Standard
Melt temperature 190 - 230 °C -
Processing Recommendation ExtrusionValueUnitTest Standard
Melt temperature 190 - 230 °C -
Characteristics
Processing
Injection Molding, Pipe/Tube Extrusion, Sheet Extrusion, Compression Molding
Delivery form
Pellets, Black
Special Characteristics
U.V. stabilized or stable to weather
Features
Creep Resistance, Thermal Stability, Weldable
Chemical Resistance
General Chemical Resistance, Environmental Stress Crack Resistance, Hydrolytically Stable
Certifications
Food contact, Drinking water contact
Applications
Building Construction
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.