Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hostalen GM 9310 C BLACK - (PE-HD) - LyondellBasell Industries

Material Data Center offers the following functions for Hostalen GM 9310 C BLACK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Hostalen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 4.5 g/10min ISO 1133
Temperature 190 °C -
Load 21.6 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 1250 MPa ISO 527
Yield stress 26 MPa ISO 527
Yield strain 7 % ISO 527
Tensile creep modulus, 1h 780 MPa ISO 899-1
Charpy notched impact strength, +23°C 5 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 3 kJ/m² ISO 179/1eA
Ball indentation hardness 55 MPa ISO 2039-1
Thermal propertiesValueUnitTest Standard
ISO Data
Vicat softening temperature, B 83 °C ISO 306
Electrical propertiesValueUnitTest Standard
ISO Data
Volume resistivity 100000 Ohm*m IEC 62631-3-1
Surface resistivity 10000 Ohm IEC 62631-3-2
ASTM Data
Surface Resistivity 10000 Ohm ASTM D 257
Volume Resistivity 100000 Ohm*cm ASTM D 257
Other propertiesValueUnitTest Standard
Density 1000 kg/m³ ISO 1183
Characteristics
Processing
Pipe/Tube Extrusion, Sheet Extrusion, Other Extrusion
Delivery form
Black
Special Characteristics
Increased electrical conductivity
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.