Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Inzea® F10 - (PLA+PSAC) - Nurel S.A.

Material Data Center offers the following functions for Inzea® F10:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Inzea datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Optical properties - Other properties - Film Properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 7 cm³/10min ISO 1133
Temperature 190 °C -
Load 2.16 kg -
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 80 % ASTM D 1003
Other propertiesValueUnitTest Standard
Biobased content 33 % -
Moisture Content 0.5 % -
Film PropertiesValueUnitTest Standard
ISO Data
Tensile Modulus, parallel 100 MPa ISO 527-3
Stress at yield, parallel 6 MPa ISO 527-3
Strain at yield, parallel 15 % ISO 527-3
Stress at break, parallel 25 MPa ISO 527-3
Maximum strain, parallel 300 % ISO 527-3
Trouser Tear resistance, parallel 45 N/mm ISO 6383-1
Thickness of specimen 0.02 mm -
Characteristics
Processing
Blown Film Extrusion, Film Extrusion, Thermoforming
Certifications
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer), Compostable ISO 13432 (Certificate)
Applications
Packaging
Regional Availability
Europe, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.