Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of K-Resin® ECO KR03 - SB - INEOS Styrolution

Material Data Center offers the following functions for K-Resin® ECO KR03:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other K-Resin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Attributed Content of ISCC-certified Bio-Circular Sources (min.): 60 %
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 7.5 g/10min ASTM D 1238
Temperature 200 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Modulus 1517 MPa ASTM D 638
Tensile Strength at Yield 26.2 MPa ASTM D 638
Elongation at Break 230 % ASTM D 638
Flexural Modulus 1793 MPa ASTM D 790
Flexural Strength 37.2 MPa ASTM D 790
Shore D Hardness 63 - ASTM D 2240
Other Standards[S]
Nominal strain at break 170 %
S: These properties are reported by the producer according standards that are different to our defaults.
Thermal propertiesValueUnitTest Standard
ASTM Data
DTUL @ 264 psi 62.2[ann.] °C ASTM D 648
Vicat Temperature 85 °C ASTM D 1525
ann.: annealed
Optical propertiesValueUnitTest Standard
ASTM Data
Gloss 162 - ASTM D 2457
Haze 1 % ASTM D 1003
Light Transmittance 92 % ASTM D 1003
Other propertiesValueUnitTest Standard
Density 1010 kg/m³ ASTM D 792
Characteristics
Processing
Injection Molding, Sheet Extrusion, Blow Molding, Thermoforming
Delivery form
Pellets
Special Characteristics
High impact or impact modified, Transparent
Features
Blending Resin, High Gloss
Certifications
Contains renewable resources, Food contact, ISCC Plus
Applications
Medical, Packaging, Toys
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.