Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUMID GP2130A(W) - PA6-GF13 - LG Chem

Material Data Center offers the following functions for LUMID GP2130A(W):
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lumid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.0095 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Strength at Yield 127 MPa ASTM D 638
Elongation at Break 5 % ASTM D 638
Flexural Modulus 4709 MPa ASTM D 790
Flexural Strength 167 MPa ASTM D 790
Izod Impact notched, 1/4 in 56.6 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ASTM Data
UL 94 Flame rating HB - UL 94
Thickness tested 0.75 mm -
Coefficient of Thermal Expansion, MD 50 E-6/K ASTM D 696
DTUL @ 264 psi 200 °C ASTM D 648
Melting Temperature 220 °C ASTM D 3418
Electrical propertiesValueUnitTest Standard
ASTM Data
Dielectric Strength, Short Time 20 kV/mm ASTM D 149
Dielectric Constant, 1 MHz 3.8 - ASTM D 150
Volume Resistivity 1E17 Ohm*cm ASTM D 257
Arc Resistance 160 s ASTM D 495
Other propertiesValueUnitTest Standard
Water Absorption, 24hr 1.3 % ASTM D 570
Density 1220 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 - 100 °C -
Pre-drying - Time 4 - 5 h -
Melt temperature 250 - 280 °C -
Mold temperature 80 - 100 °C -
Zone 1 235 - 255 °C -
Zone 2 240 - 270 °C -
Zone 3 240 - 270 °C -
Nozzle temperature 250 - 280 °C -
Characteristics
Processing
Injection Molding
Applications
Automotive, General Purpose
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.