Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Luran® SAN W - SAN - INEOS Styrolution

Material Data Center offers the following functions for Luran® SAN W:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Luran datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 60 cm³/10min ISO 1133
Temperature 220 °C -
Load 10 kg -
Molding shrinkage, normal 0.3 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 3600 MPa ISO 527
Strain at break 2.1 % ISO 527
Flexural modulus, 23°C 3600 MPa ISO 178
Flexural strength 115 MPa ISO 178
Izod notched impact strength, +23°C 1.8 kJ/m² ISO 180/1A
Rockwell hardness R 124 - ISO 2039-2
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 90[ann.] °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 95[ann.] °C ISO 75-1/-2
ASTM Data
Vicat Temperature 101 °C ASTM D 1525
ann.: annealed
Optical propertiesValueUnitTest Standard
ASTM Data
Light Transmittance 89.5 % ASTM D 1003
Other propertiesValueUnitTest Standard
Density 1070 kg/m³ ISO 1183
Bulk density 600 kg/m³ -
Characteristics
Delivery form
Pellets
Special Characteristics
Transparent
Certifications
Food contact
Applications
Packaging
Regional Availability
Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.