Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Plenco 08122 - Polyester - Plastics Engineering Co.

Material Data Center offers the following functions for Plenco 08122:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Plenco datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.0032 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Modulus 13880 MPa ASTM D 638
Tensile Strength 50 MPa ASTM D 638
Compressive Strength 142 MPa ASTM D 695
Flexural Modulus 12660 MPa ASTM D 790
Flexural Strength 117 MPa ASTM D 790
Rockwell Hardness E 52 - ASTM D 785
Izod Impact notched, 1/8 in 335 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ASTM Data
UL 94 Flame rating V-0 - UL 94
Thickness tested 1.1 mm -
DTUL @ 264 psi 271 °C ASTM D 648
Electrical propertiesValueUnitTest Standard
ASTM Data
Dielectric Strength, Short Time 12.3 kV/mm ASTM D 149
Dielectric Strength, Step-by-Step 10.1 kV/mm ASTM D 149
Dissipation Factor, 1 MHz 0.028 - ASTM D 150
Dielectric Constant, 1 MHz 4.7 - ASTM D 150
Volume Resistivity >1E15 Ohm*cm ASTM D 257
Arc Resistance 191 s ASTM D 495
Other propertiesValueUnitTest Standard
Density 1910 kg/m³ ASTM D 792
Characteristics
Processing
Compression Molding
Delivery form
Bulk Molding Compound, Natural Color
Special Characteristics
Flame retardant, Heat stabilized or stable to heat
Applications
Electrical and Electronical, General Purpose
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.