Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of POLYFLAM® RPP 1275 - PP-T20 FR(17+72) - LyondellBasell Industries

Material Data Center offers the following functions for POLYFLAM® RPP 1275:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Polyflam datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 8 cm³/10min ISO 1133
Temperature 230 °C -
Load 2.16 kg -
ASTM Data
Mold Shrinkage, MD 0.012 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 3000 MPa ISO 527
Yield stress 26.2 MPa ISO 527
Yield strain 2.5 % ISO 527
Charpy impact strength, +23°C 25 kJ/m² ISO 179/1eU
Charpy impact strength, -30°C 10 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 2 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 2 kJ/m² ISO 179/1eA
ASTM Data
Tensile Strength at Yield 28 MPa ASTM D 638
Tensile Strength at Break 26 MPa ASTM D 638
Flexural Modulus 3000 MPa ASTM D 790
Flexural Strength 45 MPa ASTM D 790
Izod Impact notched, 1/8 in 38.4 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 65 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 115 °C ISO 75-1/-2
Vicat softening temperature, B 85 °C ISO 306
Burning Behav. at 1.5 mm nom. thickn. V-0 class IEC 60695-11-10
Thickness tested 1.6 mm -
Yellow Card available yes - -
Burning Behav. at thickness h V-0 class IEC 60695-11-10
Thickness tested 0.8 mm -
Yellow Card available yes - -
ASTM Data
DTUL @ 66 psi 120 °C ASTM D 648
DTUL @ 264 psi 65 °C ASTM D 648
Electrical propertiesValueUnitTest Standard
ISO Data
Comparative tracking index 600 - IEC 60112
Other propertiesValueUnitTest Standard
Density 1420 kg/m³ ISO 1183
Density 1390 kg/m³ ASTM D 792
Characteristics
Processing
Injection Molding
Special Characteristics
Flame retardant
Features
Homopolymer
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.