Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ralupol® UP 5000 - UP-GF - Raschig GmbH

Material Data Center offers the following functions for Ralupol® UP 5000:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ralupol datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
For more detailed information, please read our brochure
or contact our representatives in your region.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Thermal conductivity of melt 0.65 W/(m K) -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 10000 MPa ISO 527
Tensile Strength 57.5 MPa ISO 527
Flexural modulus, 23°C 13500 MPa ISO 178
Charpy impact strength, +23°C 5 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 3 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 8.00 MPa 190 °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 15 E-6/K ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.6 mm -
Electrical propertiesValueUnitTest Standard
ISO Data
Relative permittivity, 100Hz 5.5 - IEC 62631-2-1
Relative permittivity, 1MHz 4.5 - IEC 62631-2-1
Dissipation factor, 100Hz 200 E-4 IEC 62631-2-1
Dissipation factor, 1MHz 200 E-4 IEC 62631-2-1
Volume resistivity 1E11 Ohm*m IEC 62631-3-1
Surface resistivity 1E12 Ohm IEC 62631-3-2
Electric strength 30 kV/mm IEC 60243-1
Comparative tracking index 600 - IEC 60112
ASTM Data
Arc Resistance 4 s ASTM D 495
Other propertiesValueUnitTest Standard
Water absorption 0.5 % Sim. to ISO 62
Density 2050 kg/m³ ISO 1183
Bulk density 900 kg/m³ -
Characteristics
Processing
Transfer Molding, Compression Molding
Delivery form
Pellets, Natural Color
Special Characteristics
Heat stabilized or stable to heat
Regional Availability
North America, Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.