Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SCHULADUR® A GF 10 - PBT-GF10 - LyondellBasell Industries

Material Data Center offers the following functions for SCHULADUR® A GF 10:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Schuladur datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
10% glass fibre reinforced PBT

Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 30 cm³/10min ISO 1133
Temperature 250 °C -
Load 2.16 kg -
ASTM Data
Mold Shrinkage, MD 0.008 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 4500 MPa ISO 527
Stress at break 90 MPa ISO 527
Strain at break 3.5 % ISO 527
Charpy impact strength, +23°C 20 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 5 kJ/m² ISO 179/1eA
ASTM Data
Tensile Strength at Break 79.3 MPa ASTM D 638
Flexural Modulus 4688 MPa ASTM D 790
Flexural Strength 121 MPa ASTM D 790
Izod Impact notched, 1/8 in 48 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 185 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 215 °C ISO 75-1/-2
Burning Behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.5 mm -
Yellow Card available yes - -
Burning Behav. at thickness h HB class IEC 60695-11-10
Thickness tested 3.0 mm -
Yellow Card available yes - -
ASTM Data
DTUL @ 66 psi 188 °C ASTM D 648
DTUL @ 264 psi 177 °C ASTM D 648
Electrical propertiesValueUnitTest Standard
ISO Data
Volume resistivity >1E13 Ohm*m IEC 62631-3-1
Surface resistivity >1E15 Ohm IEC 62631-3-2
Comparative tracking index 300 - IEC 60112
Other propertiesValueUnitTest Standard
Density 1370 kg/m³ ISO 1183
Density 1380 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 120 °C -
Pre-drying - Time 2 - 4 h -
Melt temperature 230 - 260 °C -
Mold temperature 70 - 90 °C -
Characteristics
Processing
Injection Molding
Delivery form
Granules
Additives
Release agent
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Other text information
Injection molding
PREPROCESSING; Pretreatment
Predrying: 2-4 h / 120°C

PROCESSING ;Processing:

Melttemperature230 - 260°C
Mouldtemperature70 - 90°C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.