Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Solplast TH 70A9000 C1 - TPS - Uteksol d.o.o.

Material Data Center offers the following functions for Solplast TH 70A9000 C1:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Solplast datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 3 g/10min ISO 1133
Temperature 190 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 8.6 MPa ISO 37
Strain at break 790 % ISO 37
Compression set at 23 °C, 24h 23 % ISO 815
Compression set at 70 °C, 24h 41 % ISO 815
Compression set at 100 °C, 24h 63 % ISO 815
Tear strength 27 kN/m ISO 34-1
Shore A hardness 70 - ISO 7619-1
Other propertiesValueUnitTest Standard
Density 1160 kg/m³ ISO 1183
Characteristics
Processing
Other Extrusion
Features
Copolymer
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.