Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Styroflex® ECO 2G66 BC100 - SB - INEOS Styrolution

Material Data Center offers the following functions for Styroflex® ECO 2G66 BC100:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Styroflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
Carbon Footprint Reduction vs Fossil-Based (3rd party validated): 126 % (ISO 14044)
Attributed Content of ISCC-certified Bio-Circular Sources: 100 %
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 13 cm³/10min ISO 1133
Temperature 200 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 70 MPa ISO 527
Yield stress 3 MPa ISO 527
Yield strain 50 % ISO 527
Nominal strain at break 500 % ISO 527
Stress at break 9 MPa ISO 527
Strain at break 450 % ISO 527
Flexural modulus, 23°C 60 MPa ISO 178
Flexural strength 2 MPa ISO 178
Charpy notched impact strength, +23°C N kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 2 kJ/m² ISO 179/1eA
Shore A hardness 86 - ISO 7619-1
Shore D hardness 30 - ISO 7619-1
Thermal propertiesValueUnitTest Standard
ISO Data
Vicat softening temperature, A 39 °C ISO 306
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 10 % ASTM D 1003
Light Transmittance 80 % ASTM D 1003
Other Standards[S]
Index of Refraction 1.57 - ISO 489
S: These properties are reported by the producer according standards that are different to our defaults.
Other propertiesValueUnitTest Standard
Water absorption 0.07 % Sim. to ISO 62
Density 998 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Melt temperature 170 - 240 °C -
Mold temperature 30 - 50 °C -
Characteristics
Processing
Injection Molding, Blown Film Extrusion, Film Extrusion
Delivery form
Pellets
Special Characteristics
High impact or impact modified, Transparent, Sterilizable, Ethylene Oxide (EtO) Sterilization, Gamma irradiation sterilization
Chemical Resistance
Radiation Resistance
Certifications
Contains renewable resources, Food contact, ISCC Plus
Applications
Medical, Packaging
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.