Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Texin® 985A - TPU - Covestro Deutschland AG

Material Data Center offers the following functions for Texin® 985A:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Texin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.008 mm/mm ASTM D 955
Mold Shrinkage, TD 0.008 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ASTM Data
Flexural Modulus 26.9 MPa ASTM D 790
Modulus at 100% Elongation 5.5 MPa ASTM D 412
Modulus at 300% Elongation 3.2 MPa ASTM D 412
Shore A Hardness 85 - ASTM D 2240
Tear Strength 87.6 kN/m ASTM D 624
Compression Set , 22 hr @ 73 °F 19 % ASTM D 395
Compression Set , 22 hr @ 158 °F 80 % ASTM D 395
Tensile Strength 38.6 MPa ASTM D 412
Elongation at Break 590 % ASTM D 412
Other Standards[S]
Taber Abrasion Resistance 30 mg/1000 cycles ASTM D 3489
S: These properties are reported by the producer according standards that are different to our defaults.
Thermal propertiesValueUnitTest Standard
ASTM Data
Glass Transition Temperature -46 °C ASTM E 1356
Vicat Temperature 80 °C ASTM D 1525
Other propertiesValueUnitTest Standard
Density 1120 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 82 - 93 °C -
Pre-drying - Time 4 h -
Processing humidity ≤0.03 % -
Melt temperature 193 - 210 °C -
Mold temperature 16 - 43 °C -
Zone 1 182 - 202 °C -
Zone 2 185 - 204 °C -
Zone 3 185 - 204 °C -
Nozzle temperature 188 - 207 °C -
Screw speed 40 - 80 rpm -
Injection pressure 55.2 - 103 MPa -
Back pressure 5.52 MPa -
Processing Recommendation ExtrusionValueUnitTest Standard
Melt temperature 190 - 205 °C -
Feed temperature 182 - 199 °C -
Zone 1 182 - 204 °C -
Zone 2 182 - 204 °C -
Nozzle temperature 188 - 210 °C -
Characteristics
Processing
Injection Molding, Pipe/Tube Extrusion, Profile Extrusion, Sheet Extrusion, Blow Molding
Delivery form
Natural Color
Chemical Resistance
Hydrolytically Stable
Certifications
Food contact, Food approval FDA 21 CFR, Drinking water contact NSF 61
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.