Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® E47-S3 - TPA - Evonik Operations GmbH

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

Heat- and light-stabilized compound based on polyamide 12 elastomer for molding of sport shoe soles

VESTAMID® E47-S3 is a PA 12 elastomer consisting of PA12 segments and softening segments. The material is free of volatile or migrating plasticizer.
 
The VESTAMID® E represent thermoplastic elastomers generically characterized as polyether block copolyamides (PEBA) consisting of PA 12 and polyether segments.

VESTAMID® E47-S3 is especially developed for sport shoe soles. It has good impact strength at low temperatures.

VESTAMID® E47-S3 is supplied as spherical pellets in moisture-proof packaging, ready for processing.
 
The process temperatures should be within a range of 180°C – 220°C.

Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM

Processing/Physical Characteristics	dry / cond	Unit	Test Standard
ISO Data
Melt volume-flow rate, MVR	65 / *	cm³/10min	ISO 1133
Temperature	240 / *	°C	-
Load	2.16 / *	kg	-
Molding shrinkage, parallel	0.3 / *	%	ISO 294-4, 2577
Molding shrinkage, normal	0.8 / *	%	ISO 294-4, 2577

Mechanical properties	dry / cond	Unit	Test Standard
ISO Data
Tensile Modulus	130 / -	MPa	ISO 527
Tensile creep modulus, 1000h	* / 90	MPa	ISO 899-1
Charpy impact strength, +23°C	N / -	kJ/m²	ISO 179/1eU
Charpy impact strength, -30°C	N / -	kJ/m²	ISO 179/1eU
Charpy notched impact strength, +23°C	N / -	kJ/m²	ISO 179/1eA
Charpy notched impact strength, -30°C	N / -	kJ/m²	ISO 179/1eA
Tensile notched impact strength, +23°C	170 / -	kJ/m²	ISO 8256/1
Stress at 10% elongation	7.9 / *	MPa	ISO 527
Stress at 100% elongation	13 / *	MPa	ISO 527
Stress at 300% elongation	20 / *	MPa	ISO 527
Strain at break TPE	>300 / *	%	ISO 527
Shore D hardness	47 / *	-	ISO 7619-1

Thermal properties	dry / cond	Unit	Test Standard
ISO Data
Melting temperature, 10°C/min	157 / *	°C	ISO 11357-1/-3
Glass transition temperature, 10°C/min	-50 / *	°C	ISO 11357-1/-2
Temp. of deflection under load, 1.80 MPa	45 / *	°C	ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa	65 / *	°C	ISO 75-1/-2
Vicat softening temperature, B	70 / *	°C	ISO 306
Coeff. of linear therm. expansion, parallel	230 / *	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion, normal	210 / *	E-6/K	ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
Thickness tested	1.6 / *	mm	-

Electrical properties	dry / cond	Unit	Test Standard
ISO Data
Relative permittivity, 100Hz	8.5 / -	-	IEC 62631-2-1
Relative permittivity, 1MHz	4.7 / -	-	IEC 62631-2-1
Dissipation factor, 100Hz	1200 / -	E-4	IEC 62631-2-1
Dissipation factor, 1MHz	1300 / -	E-4	IEC 62631-2-1
Volume resistivity	1E9 / -	Ohm*m	IEC 62631-3-1
Electric strength	37 / -	kV/mm	IEC 60243-1

Other properties	dry / cond	Unit	Test Standard
Water absorption	1 / *	%	Sim. to ISO 62
Humidity absorption	0.4 / *	%	Sim. to ISO 62
Density	1020 / -	kg/m³	ISO 1183

Diagrams

Characteristics

Processing

Injection Molding, Profile Extrusion, Other Extrusion

Delivery form

Pellets

Special Characteristics

Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat

Applications

Sports Equipment

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Chemical Media Resistance

Acids
	Acetic Acid (5% by mass) (23°C)
	Citric Acid solution (10% by mass) (23°C)
Bases
	Sodium Hydroxide solution (35% by mass) (23°C)
	Sodium Hydroxide solution (1% by mass) (23°C)
	Ammonium Hydroxide solution (10% by mass) (23°C)
Alcohols
	Isopropyl alcohol (23°C)
	Methanol (23°C)
	Ethanol (23°C)
Hydrocarbons
	n-Hexane (23°C)
	Toluene (23°C)
	iso-Octane (23°C)
Ketones
	Acetone (23°C)
Ethers
	Diethyl ether (23°C)
Salt solutions
	Sodium Chloride solution (10% by mass) (23°C)
	Sodium Carbonate solution (20% by mass) (23°C)
	Sodium Carbonate solution (2% by mass) (23°C)
Other
	Ethyl Acetate (23°C)
	Hydrogen peroxide (23°C)
	Water (23°C)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.