Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® Terra HS1851 - PA610-GF20 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® Terra HS1851:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Medium viscosity, glass fiber–reinforced, easily demoldable, heat-stabilized polyamide 610 compound for efficient injection molding

VESTAMID® Terra HS1851 is a glass fiber-reinforced, heat-stabilized, medium-viscosity PA 610 compound for injection molding application. The material contains about 20% glass fibers, an ageing protective agent and processing aid for a fast and even form filling.

The carbonamide groups (-CO-NH-) of the polyamides form hydrogen bridge bonds between the chains of the macromolecules, thereby substantially promoting crystallinity and increasing their strength, melting point, resistance to chemicals and even water absorption. This is characteristic of all semi-crystalline polyamides.

Because of its semi-crystalline morphology VESTAMID® Terra HS1851 provides a high impact strength, excellent chemical resistance (e.g. against greases, oils, alkalis and saline solutions), a low coefficient of friction and high abrasion resistance.
 

VESTAMID® Terra HS1851 is supplied as cylindrical granules, ready for processing, in moisture-proof bags.

 

VESTAMID® Terra is a group of new polyamides, the monomers for which are based entirely or partly on renewable raw materials.
 

VESTAMID® Terra HS is the polycondensation product of 1,6-hexamethylene diamine (H) and 1,10-decanedioic acid (sebacic acid—S). Because sebacic acid is derived from castor oil, VESTAMID® Terra HS is a material that is partly based on bio-based and renewable resources.
 

Pigmentation may affect values.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM OR VISIT OUR PRODUCT AT  WWW.VESTAMID.TERRA.COM
Processing/Physical Characteristicsdry / condUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 21 / * cm³/10min ISO 1133
Temperature 250 / * °C -
Load 5 / * kg -
Molding shrinkage, parallel 0.4 / * % ISO 294-4, 2577
Molding shrinkage, normal 0.7 / * % ISO 294-4, 2577
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus 6000 / - MPa ISO 527
Stress at break 131 / - MPa ISO 527
Strain at break 3.8 / - % ISO 527
Charpy impact strength, +23°C 86 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
Charpy impact strength, -30°C 78 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
Charpy notched impact strength, +23°C 11 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
Charpy notched impact strength, -30°C 8.9 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 223 / * °C ISO 11357-1/-3
Glass transition temperature, 10°C/min 49 / * °C ISO 11357-1/-2
Temp. of deflection under load, 1.80 MPa 204 / * °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 222 / * °C ISO 75-1/-2
Vicat softening temperature, B 219 / * °C ISO 306
Coeff. of linear therm. expansion, parallel 26 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 124 / * E-6/K ISO 11359-1/-2
Other propertiesdry / condUnitTest Standard
Water absorption 2.6 / * % Sim. to ISO 62
Density 1220 / - kg/m³ ISO 1183
Characteristics
Processing
Injection Molding
Delivery form
Pellets
Special Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Features
Tribologic Grade
Chemical Resistance
Alkali Resistance, General Chemical Resistance, Grease Resistance, Oil Resistance
Certifications
Contains renewable resources
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.