Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTODUR® GF30-FR3 BK V307168 - PBT-GF30 FR(17) - Evonik Operations GmbH

Material Data Center offers the following functions for VESTODUR® GF30-FR3 BK V307168:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestodur datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts

Glass fiber-reinforced and flame retardant polybutylene terephthalate compound

VESTODUR® GF30-FR3 BK V307168 is a glass fiber reinforced (with 30% glass fiber), semicrystalline thermoplastic compounds for injection molding, based on polybutylene terephthalate (PBT).

Test bars made of this compound are rated V-0, according UL94 by Underwriters Laboratories Inc., self-extinguishing and nondripping.
 

This compound is especially suitable for parts which are subjected to high mechanical and thermal loads and must have a very good flame-resistance.

The incorporated flame retardant is non-migrating and does not contain polybrominated diphenyl ethers. The additive has no corrosive effects on metal inserts or neighboring metal parts.

Therefore, the compounds are distinguished for moldings in the electrical and electronical industry. Laser marking with high contrasts is possible.

The compounds are supplied as cylindrical pellets in polyethylene packaging.

Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM 
OR VISIT OUR PRODUCT AT WWW.VESTODUR.COM

Processing/Physical Characteristicsdry / condUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 12 / * cm³/10min ISO 1133
Temperature 250 / * °C -
Load 2.16 / * kg -
Molding shrinkage, parallel 0.3 / * % ISO 294-4, 2577
Molding shrinkage, normal 1.2 / * % ISO 294-4, 2577
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus 11000 / 10850 MPa ISO 527
Stress at break 140 / 125 MPa ISO 527
Strain at break 2 / 2 % ISO 527
Charpy impact strength, +23°C 55 / 46 kJ/m² ISO 179/1eU
Type of failure C / C - -
Charpy impact strength, -30°C 60 / 50 kJ/m² ISO 179/1eU
Type of failure C / C - -
Charpy notched impact strength, +23°C 10 / 8 kJ/m² ISO 179/1eA
Type of failure C / C - -
Charpy notched impact strength, -30°C 9 / 9 kJ/m² ISO 179/1eA
Type of failure C / C - -
Shore D hardness 84 / * - ISO 7619-1
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 222 / * °C ISO 11357-1/-3
Glass transition temperature, 10°C/min 44 / * °C ISO 11357-1/-2
Temp. of deflection under load, 1.80 MPa 216 / * °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 223 / * °C ISO 75-1/-2
Vicat softening temperature, B 213 / * °C ISO 306
Coeff. of linear therm. expansion, parallel 50 / * E-6/K ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn. V-0 / * class IEC 60695-11-10
Thickness tested 1.5 / * mm -
Burning Behav. at thickness h V-0 / * class IEC 60695-11-10
Thickness tested 0.8 / * mm -
Oxygen index 34 / * % ISO 4589-1/-2
Electrical propertiesdry / condUnitTest Standard
ISO Data
Relative permittivity, 100Hz 4.1 / - - IEC 62631-2-1
Relative permittivity, 1MHz 4.4 / - - IEC 62631-2-1
Dissipation factor, 100Hz 30 / - E-4 IEC 62631-2-1
Dissipation factor, 1MHz 150 / - E-4 IEC 62631-2-1
Volume resistivity 1E12 / - Ohm*m IEC 62631-3-1
Other propertiesdry / condUnitTest Standard
Water absorption 0.4 / * % Sim. to ISO 62
Humidity absorption 0.2 / * % Sim. to ISO 62
Density 1720 / - kg/m³ ISO 1183
Characteristics
Processing
Injection Molding
Delivery form
Pellets, Black
Special Characteristics
Flame retardant
Features
Laser Markable
Applications
Electrical and Electronical
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.