Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® AG7K - PA66-GF35 - Ascend

Material Data Center offers the following functions for Vydyne® AG7K:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Vydyne AG7K is a 35% glass fiber reinforced, heat and hydrolytically stabilized PA66 for injection molded applications.
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus 12500 / 9200 MPa ISO 527
Stress at break 211 / 155 MPa ISO 527
Strain at break 3.5 / 4.3 % ISO 527
Charpy impact strength, +23°C 107 / 112 kJ/m² ISO 179/1eU
Charpy impact strength, -30°C 91 / 102 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 16 / 19 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 13 / 13 kJ/m² ISO 179/1eA
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 260 / * °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 253 / * °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 262 / * °C ISO 75-1/-2
Electrical propertiesdry / condUnitTest Standard
ISO Data
Volume resistivity >1E13 / - Ohm*m IEC 62631-3-1
Electric strength 30 / 29 kV/mm IEC 60243-1
Other propertiesdry / condUnitTest Standard
Water absorption 0.8 / * % Sim. to ISO 62
Humidity absorption 1.4 / * % Sim. to ISO 62
Density 1420 / - kg/m³ ISO 1183
Characteristics
Processing
Injection Molding
Delivery form
Pellets
Additives
Release agent
Special Characteristics
Heat stabilized or stable to heat
Chemical Resistance
Hydrolytically Stable
Regional Availability
North America, Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.