Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VYTEEN ABS 2904 - ABS - Lavergne

Material Data Center offers the following functions for VYTEEN ABS 2904:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vyteen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 7 g/10min ISO 1133
Temperature 230 °C -
Load 3.8 kg -
ASTM Data
Melt Flow Index, MFI 7 g/10min ASTM D 1238
Temperature 200 °C -
Load 5 kg -
Mold Shrinkage, MD 0.007 mm/mm ASTM D 955
Mold Shrinkage, TD 0.008 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2000 MPa ISO 527
Yield stress 35 MPa ISO 527
Flexural modulus, 23°C 2200 MPa ISO 178
Charpy notched impact strength, +23°C 15 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 7 kJ/m² ISO 179/1eA
ASTM Data
Tensile Strength at Yield 39 MPa ASTM D 638
Flexural Modulus 2100 MPa ASTM D 790
Flexural Strength 66 MPa ASTM D 790
Rockwell Hardness R 85 - ASTM D 785
Izod Impact notched, 1/8 in 170 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 0.45 MPa 90 °C ISO 75-1/-2
Vicat softening temperature, B 86 °C ISO 306
ASTM Data
UL 94 Flame rating HB - UL 94
DTUL @ 66 psi 80 °C ASTM D 648
Other propertiesValueUnitTest Standard
Density 1050 kg/m³ ISO 1183
Density 1070 kg/m³ ASTM D 792
Characteristics
Processing
Injection Molding
Delivery form
Black
Special Characteristics
High impact or impact modified
Applications
Automotive, Electrical and Electronical
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.