Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of BMC RF 9/18 - UP-(MD+GF)70 - Polynt S.p.A.

Material Data Center offers the following functions for BMC RF 9/18:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other BMC datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Texto del producto
Resistant. Negligible, reversible or no changes in mass and dimensions.

Please consider the information about the application of the materials.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Contracción posterior al moldeo, paralelo 0.1 % ISO 294-4, 2577
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Resistencia al impacto Charpy, +23°C 25 kJ/m² ISO 179/1eU
Dureza Rockwell M 80 - ISO 2039-2
Other Standards[S]
Módulo de flexión, 23°C 9500 MPa ISO 14125A
Resistencia a la flexión 80 MPa ISO 14125A
S: These properties are reported by the producer according standards that are different to our defaults.
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Combustibilidad a espesor h V-0 class IEC 60695-11-10
Espesores de probeta 3.0 mm -
Yellow Card disponible sí - -
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
Propiedades eléctricasValorUnidadesMétodo de ensayo
ISO Data
Resistividad volumétrica específica 1E12 Ohm*m IEC 62631-3-1
Resistividad superficial específica 1E14 Ohm IEC 62631-3-2
Resistencia dieléctrica 16 kV/mm IEC 60243-1
ASTM Data
Resistencia al arco 180 s ASTM D 495
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua 0.2 % Sim. to ISO 62
Densidad 1800 kg/m³ ISO 1183
Características
Procesamiento y forma de entrega
Moldeo por compresión
Forma de suministro
Compuesto de moldeo a granel
Características especiales
Resistencia mejorada al fuego, Sin halógeno
Applicaciones
Electrica
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.