Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Bergaflex® BFI 25A-319 - TPS - Avient Corporation

Material Data Center offers the following functions for Bergaflex® BFI 25A-319:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Bergaflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Otras propiedades - Condiciones de transformación
Any use of this information falls under the rules of our disclaimer.
Texto del producto
Not resistant. May be used under certain conditions (brief contact).

Please consider the information about the application of the materials.
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Tensión a 100% alargamiento 0.5 MPa ISO 527
Tensión a 300% alargamiento 1 MPa ISO 527
Resistencia a la tracción TPE 3 MPa ISO 527
Alargamiento a rotura TPE >300 % ISO 527
Deformación permanente por compresión a 23°C, 24h 16 % ISO 815
Deformación permanente por compresión a 70°C, 24h 45 % ISO 815
Deformación permanente por compresión a 100°C, 24h 75 % ISO 815
Dureza Shore A 25 - ISO 7619-1
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1170 kg/m³ ISO 1183
Condiciones de transformaciónValorUnidadesMétodo de ensayo
ISO Data
Moldeo por inyección, temperatura de la masa 170 °C ISO 294
Moldeo por inyección, temperatura del molde 30 °C ISO 294
Características
Procesamiento y forma de entrega
Moldeo por inyección, Extrusion del film, Extrusión de perfiles, Otros tipos de extrusión, Moldeo por soplado, Calandrado
Forma de suministro
Sémola
Características especiales
Estable contra rayos U.V./interperie
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.