Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Clyrell EC140R - PP - LyondellBasell Industries

Material Data Center offers the following functions for Clyrell EC140R:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Clyrell datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades opticas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 40.5 cm³/10min ISO 1133
Temperatura 230 °C -
Carga 2.16 kg -
Índice de fluidez, MFI 30 g/10min ISO 1133
Temperatura 230 °C -
Carga 2.16 kg -
ASTM Data
Índice de fluidez, MFI 30 g/10min ASTM D 1238
Temperatura 230 °C -
Carga 2.16 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 850 MPa ISO 527
Esfuerzo de fluencia 20 MPa ISO 527
Alarg. en límite elástico 18 % ISO 527
Alargamiento a rotura >50 % ISO 527
Resistencia al impacto Charpy c/entalla, +23°C 20 kJ/m² ISO 179/1eA
Ball indentation hardness 28 MPa ISO 2039-1
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 0.45 MPa 60 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, A 114 °C ISO 306
Temp. reblandecimiento Vicat, B 52 °C ISO 306
Propiedades opticasValorUnidadesMétodo de ensayo
ASTM Data
Opacidad 20 % ASTM D 1003
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 900 kg/m³ ISO 1183
Densidad 902 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Moldeo por inyección
Características especiales
Alto impacto o modificado al impacto, Transparente
Características
Blush Resistance/Low Crease Whitening, Copolímero, Copolímero aleatorio
Certifications
Contacto con alimentos, Aprovação de alimentos 1935/2004/EG, Aprobación a contacto con alimentos 10/2011, Aprobado por el FDA 21 CFR
Applicaciones
Equipos deportivos
Disponibilidad regional
Europa, Asia Pacifico, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.