Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DuraPET™ 0624 - PET - polyVisions, Inc.

Material Data Center offers the following functions for DuraPET™ 0624:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Durapet datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Contracción posterior al moldeo, paralelo 0.6 % ISO 294-4, 2577
ASTM Data
Índice de fluidez, MFI 16 g/10min ASTM D 1238
Temperatura 285 °C -
Carga 2.16 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Módulo de tracción 2246 MPa ASTM D 638
Esfuerzo de tracción 52.7 MPa ASTM D 638
Alargamiento a la rotura 350 % ASTM D 638
Módulo de flexión 2317 MPa ASTM D 790
Gardner impacto 56.5 J ASTM D 2794,4226,5420
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1290 kg/m³ ISO 1183
Características
Procesamiento y forma de entrega
Moldeo por inyección, Extrusión de película soplada, Otros tipos de extrusión, Termoconformación
Características especiales
Alto impacto o modificado al impacto
Características
Ductil
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.