Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ERACLENE® MS 80 U - (PE-HD) - Versalis S.p.A

Check here, which other Eraclene datasheets, application examples or technical articles are available in Material Data Center

Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Funciones

Any use of this information falls under the rules of our disclaimer.

Texto del producto

Eraclene MS 80 U is a gas phase HDPE with antioxidants, suitable for injection moulding process. 

Due to a narrow molecular weight distribution and a high fluidity the grade is ideal for injection moulding applications.

The polymer has a high thermal stability during the extrusion and a good balance between fluidity and mechanical properties.

Applications
Thin-walled (food containers), pharmaceutical and healthcare, aersol cup.

Caracteristicas de procesamiento y fisicas	Valor	Unidades	Método de ensayo
ISO Data
Indice de fluidez volumétrico, MVR	27	cm³/10min	ISO 1133
Temperatura	190	°C	-
Carga	2.16	kg	-
Densidad de fusión	733	kg/m³	-
Conductibilidad termica de fusión	0.39	W/(m K)	-
Calor especifico de la masa	2630	J/(kg K)	-
Temperatura de expulsión	106	°C	-

Propiedades mecánicas	Valor	Unidades	Método de ensayo
ISO Data
Módulo de tracción	1300	MPa	ISO 527
Esfuerzo de fluencia	27	MPa	ISO 527
Alarg. en límite elástico	10	%	ISO 527
Alarg. nominal a rotura	>50	%	ISO 527
Dureza Shore D	66	-	ISO 7619-1

Propiedades térmicas	Valor	Unidades	Método de ensayo
ISO Data
Temperatura de fusión, 10°C/min	132	°C	ISO 11357-1/-3
Temp. de transición vítrea, 10°C/min	118	°C	ISO 11357-1/-2
Coef.de expansión térmica lineal, paralelo	152	E-6/K	ISO 11359-1/-2

Otras propiedades	Valor	Unidades	Método de ensayo
Densidad	955	kg/m³	ISO 1183

Funciones

Características

Procesamiento y forma de entrega

Moldeo por inyección

Forma de suministro

Sémola

Disponibilidad regional

Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa

Demás información

Moldeo por inyección

#2

Typical processing temperature range:

    Melt temperature         190 - 260 °C

    Mold temperature          10-  40  °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.