View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORMION® FI 120E - Ethylene Ionomers - LyondellBasell Industries

Material Data Center offers the following functions for FORMION® FI 120E:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Formion datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades

Any use of this information falls under the rules of our disclaimer.

Caracteristicas de procesamiento y fisicas

Valor

Unidades

Método de ensayo

ISO Data

Índice de fluidez, MFI

g/10min

ISO 1133

Temperatura

190

°C

Carga

2.16

Contracción posterior al moldeo, paralelo

0.6

ISO 294-4, 2577

Contracción posterior al moldeo, normal

1.8

ISO 294-4, 2577

Propiedades mecánicas

Valor

Unidades

Método de ensayo

ISO Data

Alargamiento a rotura

225

ISO 527

Módulo de flexión, 23°C

227

MPa

ISO 178

Resistencia al impacto Izod con entalla, +23°C

kJ/m²

ISO 180/1A

Propiedades térmicas

Valor

Unidades

Método de ensayo

ISO Data

Estabilidad al calor, 0.45 MPa

°C

ISO 75-1/-2

Otras propiedades	Valor	Unidades	Método de ensayo
Densidad	960	kg/m³	ISO 1183

Características

Procesamiento y forma de entrega

Otros tipos de extrusión, Moldeo por soplado, Termoconformación

Características especiales

Estable contra rayos U.V./interperie

Características

Buenas propiedades de adhesión

Resistencia quimica

Resistencia química general

Applicaciones

Automotriz, Empacado

Disponibilidad regional

Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.