Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORTRON® FX72T6 - PPS - Celanese

Check here, which other Fortron datasheets, application examples or technical articles are available in Material Data Center

Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades - Funciones

Any use of this information falls under the rules of our disclaimer.

Texto del producto

Fortron^® FX72T6 is an unreinforced, impact modified PPS with high flowability and high impact resistance suitable for injection molding.
The mechanical properties reported on this data sheet refer to a mold wall temperature of 135°C.

Flammability at thickness h (3 mm)

V-0

-

Caracteristicas de procesamiento y fisicas	Valor	Unidades	Método de ensayo
ISO Data
Contracción posterior al moldeo, paralelo	1.3	%	ISO 294-4, 2577
Contracción posterior al moldeo, normal	1.3	%	ISO 294-4, 2577

Propiedades mecánicas	Valor	Unidades	Método de ensayo
ISO Data
Módulo de tracción	1680	MPa	ISO 527
Resistencia a la tracción	40	MPa	ISO 527
Alargamiento a rotura	20	%	ISO 527
Resistencia al impacto Charpy, +23°C	N	kJ/m²	ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C	10	kJ/m²	ISO 179/1eA

Propiedades térmicas	Valor	Unidades	Método de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa	100	°C	ISO 75-1/-2
Temp. reblandecimiento Vicat, B	122	°C	ISO 306
Combustibilidad a espesor h	V-0	class	IEC 60695-11-10
Espesores de probeta	3.0	mm	-
Combustibilidad según índice de oxigeno	48.5	%	ISO 4589-1/-2

Propiedades eléctricas	Valor	Unidades	Método de ensayo
ISO Data
Constante dieléctrica, 1MHz	3.1	-	IEC 62631-2-1
Factor de pérdidas dieléctricas, 1MHz	3	E-4	IEC 62631-2-1

Otras propiedades	Valor	Unidades	Método de ensayo
Densidad	1180	kg/m³	ISO 1183

Funciones

Características

Procesamiento y forma de entrega

Moldeo por inyección

Características especiales

Alto impacto o modificado al impacto

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.