Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORTRON® ICE 504L - PPS-GF40 - Celanese

Check here, which other Fortron datasheets, application examples or technical articles are available in Material Data Center

Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades - Funciones

Any use of this information falls under the rules of our disclaimer.

Texto del producto

FORTRON ICE 504L is a 40% glass fiber reinforced polyphenylene sulfide, that belongs to our new generation of Fortron® PPS.
This new technology allows optimization of molding conditions with faster cycle times. Due to the faster crystallization of the material at a higher temperature, the option of mold wall temperature reduction can be subject of advanced process optimization. The potential for optimization of Fortron® ICE by cycle time reduction is possible by standard cavity surface temperatures of 140°C. The potential for lowering the mold temperature must be checked individually and it depends on process and part design.
 

Flammability @1.6mm nom. thickn.	V-0	-
Flammability at thickness h (0.38 mm)	V-0	-

Caracteristicas de procesamiento y fisicas	Valor	Unidades	Método de ensayo
ISO Data
Contracción posterior al moldeo, paralelo	0.3	%	ISO 294-4, 2577
Contracción posterior al moldeo, normal	0.6	%	ISO 294-4, 2577
Calor especifico de la masa	1500	J/(kg K)	-

Propiedades mecánicas	Valor	Unidades	Método de ensayo
ISO Data
Módulo de tracción	15100	MPa	ISO 527
Resistencia a la tracción	202	MPa	ISO 527
Alargamiento a rotura	1.9	%	ISO 527
Resistencia al impacto Charpy, +23°C	53	kJ/m²	ISO 179/1eU
Resistencia al impacto Charpy, -30°C	53	kJ/m²	ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C	10	kJ/m²	ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C	10	kJ/m²	ISO 179/1eA

Propiedades térmicas	Valor	Unidades	Método de ensayo
ISO Data
Temperatura de fusión, 10°C/min	280	°C	ISO 11357-1/-3
Temp. de transición vítrea, 10°C/min	90	°C	ISO 11357-1/-2
Estabilidad al calor, 1.80 MPa	270	°C	ISO 75-1/-2
Estabilidad al calor, 8.00 MPa	215	°C	ISO 75-1/-2
Coef.de expansión térmica lineal, paralelo	26	E-6/K	ISO 11359-1/-2
Coef.de expansión térmica lineal, normal	42	E-6/K	ISO 11359-1/-2
Combustibilidad a 1.5mm esp. nom.	V-0	class	IEC 60695-11-10
Espesores de probeta	1.5	mm	-
Combustibilidad a espesor h	V-0	class	IEC 60695-11-10
Espesores de probeta	0.4	mm	-
Combustibilidad según índice de oxigeno	47	%	ISO 4589-1/-2

Propiedades eléctricas	Valor	Unidades	Método de ensayo
ISO Data
Constante dieléctrica, 1MHz	4.1	-	IEC 62631-2-1
Factor de pérdidas dieléctricas, 1MHz	20	E-4	IEC 62631-2-1
Resistividad volumétrica específica	>1E13	Ohm*m	IEC 62631-3-1
Resistividad superficial específica	>1E15	Ohm	IEC 62631-3-2

Otras propiedades	Valor	Unidades	Método de ensayo
Absorción de agua	0.02	%	Sim. to ISO 62
Densidad	1650	kg/m³	ISO 1183

Funciones

Características

Procesamiento y forma de entrega

Moldeo por inyección

Forma de suministro

Sémola

Aditivos

Desmoldeante

Certifications

Contacto con agua potable

Disponibilidad regional

Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.