Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Glastic® 1423 - UP-GF - LyondellBasell Industries

Material Data Center offers the following functions for Glastic® 1423:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Glastic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Módulo de tracción 12400 MPa ASTM D 638
Esfuerzo de fluencia a tracción 47.3 MPa ASTM D 638
Resistencia de compresión 135 MPa ASTM D 695
Módulo de flexión 9650 MPa ASTM D 790
Resistencia a la flexión 112 MPa ASTM D 790
Resistencia al impacto Izod con entalla, 1/8 in 210 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Combustibilidad UL 94 V-0 - UL 94
Estabilidad al calor @ 264 psi 260 °C ASTM D 648
Propiedades eléctricasValorUnidadesMétodo de ensayo
ASTM Data
Resistencia dieléctrica, tiempo corto 17 kV/mm ASTM D 149
Factor de pérdidas dieléctricas, 60 Hz 0.017 - ASTM D 150
Factor de pérdidas dieléctricas, 1 MHz 0.015 - ASTM D 150
Constante dieléctrica, 60 Hz 5.3 - ASTM D 150
Constante dieléctrica, 1 MHz 4.4 - ASTM D 150
Resistividad superficial 1.8E15 Ohm ASTM D 257
Resistencia al arco 189 s ASTM D 495
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua, 24hr 0.18 % ASTM D 570
Densidad 1840 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Moldeo por inyección, Moldeo por compresión
Forma de suministro
Compuesto de moldeo a granel, Negro, Blanco
Características especiales
Resistencia mejorada al fuego
Applicaciones
Electrica
Disponibilidad regional
Norteamérica
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.