Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of HOPELEN B-111 - PP - Lotte Chemical Corporation

Material Data Center offers the following functions for HOPELEN B-111:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hopelen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 0.5 g/10min ISO 1133
ASTM Data
Índice de fluidez, MFI 0.5 g/10min ASTM D 1238
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Esfuerzo de fluencia 35 MPa ISO 527
Alargamiento a rotura 100 % ISO 527
Módulo de flexión, 23°C 1420 MPa ISO 178
Resistencia al impacto Izod con entalla, +23°C 39 kJ/m² ISO 180/1A
Resistencia al impacto Izod con entalla 20 kJ/m² ISO 180/1A
Temperatura -10 °C -
ASTM Data
Esfuerzo de fluencia a tracción 37 MPa ASTM D 638
Alargamiento a la rotura 100 % ASTM D 638
Módulo de flexión 1760 MPa ASTM D 790
Resistencia al impacto Izod con entalla, 1/8 in 49 J/m ASTM D 256
Resistencia al impacto Izod con entalla, baja temperatura 25 J/m ASTM D 256
Temperatura -10 °C -
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 0.45 MPa 115 °C ISO 75-1/-2
ASTM Data
Estabilidad al calor @ 66 psi 135 °C ASTM D 648
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 900 kg/m³ ISO 1183
Densidad 900 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Extrusión de láminas
Características especiales
Estable contra el calor, Transparente
Características
Homopolímero
Certifications
Contacto con alimentos
Applicaciones
Empacado
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.