Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hylon® N1213HL BK - PA66-GF13 - Ravago Manufacturing Americas

Material Data Center offers the following functions for Hylon® N1213HL BK:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hylon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Contracción posterior al moldeo, paralelo 0.8 / * % ISO 294-4, 2577
ASTM Data
Contracción posterior al moldeo, paralelo 0.00075 mm/mm ASTM D 955
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Esfuerzo de fluencia 103 / - MPa ISO 527
Módulo de flexión, 23°C 4480 / - MPa ISO 178
Resistencia al impacto Izod con entalla, +23°C 3 / - kJ/m² ISO 180/1A
ASTM Data
Esfuerzo de fluencia a tracción 103 / - MPa ASTM D 638
Alargamiento a la rotura 2 / - % ASTM D 638
Módulo de flexión 4480 / - MPa ASTM D 790
Resistencia a la flexión 165 / - MPa ASTM D 790
Dureza Rockwell M 95 / - ASTM D 785
Resistencia al impacto Izod con entalla, 1/8 in 37 / - J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Coeficiente de dilatación térmica, long. 27 E-6/K ASTM D 696
Estabilidad al calor @ 264 psi 235 °C ASTM D 648
Otras propiedadesSeco / CondUnidadesMétodo de ensayo
Densidad 1230 / - kg/m³ ISO 1183
Absorción de agua, 24hr 1 % ASTM D 570
Densidad 1230 kg/m³ ASTM D 792
Características
Forma de suministro
Sémola, Negro
Aditivos
Lubricante
Características especiales
Estable contra el calor
Disponibilidad regional
Norteamérica
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.