Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Inzea® F2 HTS 451 - (PLA+PSAC) - Nurel S.A.

Material Data Center offers the following functions for Inzea® F2 HTS 451:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Inzea datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Texto del producto
more information can be found in the following table
Rilsamid® Chemical Resistance
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 2800 MPa ISO 527
Esfuerzo de tracción 44 MPa ISO 527
Alarg. en límite elástico 4 % ISO 527
Alargamiento a rotura 8 % ISO 527
Módulo de flexión, 23°C 2650 MPa ISO 178
Resistencia a la flexión 70 MPa ISO 178
Resistencia al impacto Charpy c/entalla, +23°C 5 kJ/m² ISO 179/1eA
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 177 °C ISO 11357-1/-3
Estabilidad al calor, 0.45 MPa 75 °C ISO 75-1/-2
Otras propiedadesValorUnidadesMétodo de ensayo
Moisture Content 0.5 % -
Características
Procesamiento y forma de entrega
Moldeo por inyección, Extrusión de fibra, Extrusion del film, Extrusión de perfiles, Termoconformación
Características especiales
Estable contra el calor
Características
Amorfo
Certifications
Contiene recursos renovables, Biodegradables, Contacto con alimentos, Compostable ISO 13432 (Productor), Compostable ISO 13432 (Certificado)
Disponibilidad regional
Europa, América del Sur y Centroaméric
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.