Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of K-Resin® ECO KR03 - SB - INEOS Styrolution

Material Data Center offers the following functions for K-Resin® ECO KR03:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other K-Resin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Texto del producto
Attributed Content of ISCC-certified Bio-Circular Sources (min.): 60 %
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Índice de fluidez, MFI 7.5 g/10min ASTM D 1238
Temperatura 200 °C -
Carga 5 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Módulo de tracción 1517 MPa ASTM D 638
Esfuerzo de fluencia a tracción 26.2 MPa ASTM D 638
Alargamiento a la rotura 230 % ASTM D 638
Módulo de flexión 1793 MPa ASTM D 790
Resistencia a la flexión 37.2 MPa ASTM D 790
Dureza D Shore 63 - ASTM D 2240
Other Standards[S]
Alarg. nominal a rotura 170 %
S: These properties are reported by the producer according standards that are different to our defaults.
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Estabilidad al calor @ 264 psi 62.2[ann.] °C ASTM D 648
Temperatura Vicat 85 °C ASTM D 1525
ann.: annealed
Propiedades opticasValorUnidadesMétodo de ensayo
ASTM Data
Brillo 162 - ASTM D 2457
Opacidad 1 % ASTM D 1003
Transmitancia luminosa 92 % ASTM D 1003
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1010 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Moldeo por inyección, Extrusión de láminas, Moldeo por soplado, Termoconformación
Forma de suministro
Sémola
Características especiales
Alto impacto o modificado al impacto, Transparente
Características
Resina de mezcla, High Gloss
Certifications
Contiene recursos renovables, Contacto con alimentos, ISCC Plus
Applicaciones
Médico, Empacado, Juguetes
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.