Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of KOPPS® S25G40 - PPS-GF40 - Kolon Industries

Material Data Center offers the following functions for KOPPS® S25G40:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Kopps datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Contracción posterior al moldeo, paralelo 0.2 % ISO 294-4, 2577
Contracción posterior al moldeo, normal 1.1 % ISO 294-4, 2577
ASTM Data
Contracción posterior al moldeo, paralelo 0.0022 mm/mm ASTM D 955
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Esfuerzo de tracción 155 MPa ISO 527
Módulo de flexión, 23°C 13200 MPa ISO 178
Resistencia al impacto Charpy c/entalla, +23°C 8 kJ/m² ISO 179/1eA
Dureza Rockwell R 120 - ISO 2039-2
ASTM Data
Esfuerzo de tracción 152 MPa ASTM D 638
Módulo de flexión 14710 MPa ASTM D 790
Resistencia a la flexión 245 MPa ASTM D 790
Dureza Rockwell R 122 - ASTM D 785
Resistencia al impacto Izod con entalla, 1/8 in 78 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 285 °C ISO 11357-1/-3
Estabilidad al calor, 1.80 MPa 265 °C ISO 75-1/-2
Combustibilidad a espesor h V-0 class IEC 60695-11-10
Espesores de probeta 0.8 mm -
ASTM Data
Combustibilidad UL 94 V-0 - UL 94
Espesores de probeta 0.8 mm -
Coeficiente de dilatación térmica, long. 220 E-6/K ASTM D 696
Estabilidad al calor @ 264 psi 265 °C ASTM D 648
Temperatura de fusión 285 °C ASTM D 3418
Propiedades eléctricasValorUnidadesMétodo de ensayo
ISO Data
Resistividad volumétrica específica >1E13 Ohm*m IEC 62631-3-1
Indice comparativo de linea de fuga 160 - IEC 60112
ASTM Data
Resistencia dieléctrica, tiempo corto 16 kV/mm ASTM D 149
Constante dieléctrica, 1 MHz 4 - ASTM D 150
Resistencia al arco 120 s ASTM D 495
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1650 kg/m³ ISO 1183
Densidad 1650 kg/m³ ASTM D 792
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 120 - 130 °C -
Tiempo de pre-secado 3 - 5 h -
Humedad de procesamiento ≤0.05 % -
Temperatura del molde 120 - 140 °C -
Zona 1 230 - 250 °C -
Zona 2 290 - 310 °C -
Zona 3 290 - 310 °C -
Temperatura de boquilla 300 - 320 °C -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Características especiales
Estable contra el calor
Disponibilidad regional
Norteamérica, Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.