Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LIM® 6010 - VMQ - Momentive Performance Materials Inc.

Material Data Center offers the following functions for LIM® 6010:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other LIM datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Texto del producto
Appearance/Color:
liquid, transparent

Characteristics:
fast curing, high tear strength

Conformity:
The product meets the requirements for passing the test standards USP Class VI and ISO 10993.
The product is compositionally compliant with the BfR recommendation XV "Silicones" and FDA 21 CFR 177.2600.

These values were determined with the following conditions:
Postbaked 1 hr @ 177ºC / 350ºF.

Other values were achieved with the following conditions:
As Molded 30 sec @ 177ºC / 350ºF:


Property Value Unit Standard
Shore A hardness, 3s 10 - ISO 868
Tensile Strength 2.76
 MPa
 ISO 37
Strain at break 510
 %
 ISO 37
Tear Strength 5.62
 kN/m
 ASTM D 624
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Esfuerzo de tracción 3 MPa ISO 37
Alargamiento a rotura 440 % ISO 37
Dureza Shore A 15 - ISO 7619-1
ASTM Data
Resistencia al desgarro 10 kN/m ASTM D 624
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Combustibilidad a 1.5mm esp. nom. HB class IEC 60695-11-10
Yellow Card disponible sí - -
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1050 kg/m³ ISO 1183
Características
Procesamiento y forma de entrega
Moldeo por inyección
Características especiales
Transparente
Certifications
Contacto con alimentos, Aprobación a contacto con alimentos BfR, Aprobado por el FDA 21 CFR, USP Class VI
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.