Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LIGHTER™ S98 - PET - Equipolymers Global

Material Data Center offers the following functions for LIGHTER™ S98:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lighter datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Texto del producto
For more detailed information, please read our brochure p. 46 to 54
or contact our representatives in your region.
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 2300 MPa ISO 527
Esfuerzo de fluencia 55 MPa ISO 527
Alarg. en límite elástico 4 % ISO 527
Resistencia a la tracción 24 MPa ISO 527
Alargamiento a rotura 250 % ISO 527
Módulo de flexión, 23°C 2100 MPa ISO 178
Resistencia al impacto Izod con entalla, +23°C 4.5 kJ/m² ISO 180/1A
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 247 °C ISO 11357-1/-3
Temp. de transición vítrea, 10°C/min 78 °C ISO 11357-1/-2
Temp. reblandecimiento Vicat, B 77 °C ISO 306
Coef.de expansión térmica lineal, paralelo 83 E-6/K ISO 11359-1/-2
Otras propiedadesValorUnidadesMétodo de ensayo
Viscosidad intrínseca 0.84 dl/g -
Acetaldehído 1 ppm -
Color b 2 - CIE
Crystallinity 50 % -
Moisture Content 0.4 % -
Bulk density 880 kg/m³ -
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de la masa 277 °C -
Temperatura del molde 20 °C -
Características
Procesamiento y forma de entrega
Moldeo por inyección, Moldeo por soplado
Características
Copolímero
Certifications
Contacto con alimentos
Applicaciones
Empacado
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.